Setting the clock (remote control only), Basic operation – Sharp XL-UH242 User Manual

Page 15

Advertising
background image

XL-UH242_11-19.fm

15

XL-UH242

Basic Operation

Setting the clock (Remote Control only)


In this example, the clock is set for the 12-hour (AM 12:00) display.

To confirm the time display:

[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
The time display will appear for about 10 seconds.

[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the

or

button to display the

time.
The time display will appear for about 10 seconds.

Note:

The "CLOCK" will appear or time will flash to confirm the time
display when the AC power supply is restored after a power failure
or unplugging the unit. If incorrect, readjust the clock as follows.

To readjust the clock:

Perform "Setting the clock" from step 1. If the "CLOCK" does not
appear in step 3, step 4 (for selecting the 12-hour or 24-hour
display) will be skipped.

To change the 12-hour or 24-hour display:

1

Press the ON/STAND-BY button to turn the power on.

2

Press the CLOCK/TIMER button.

3

Within 10 seconds, press the

or

button to

select "CLOCK", and press the MEMORY button.

4

Press the

or

button to select 12-hour or 24-

hour display and then press the MEMORY button.

"AM 12:00"

The 12-hour display will appear.

(AM 12:00 - PM 11:59)

"AM 0:00"

The 12-hour display will appear.

(AM 0:00 - PM 11:59)

"0:00"

The 24-hour display will appear.

(0:00 - 23:59)

5

Press the

or

button to adjust the hour and

then press the MEMORY button.

Press the

or

button once to advance the time by

1 hour. Hold it down to advance continuously.

6

Press the

or

button to adjust the minutes and

then press the MEMORY button.

Press the

or

button once to advance the time by

1 minute. Hold it down to change the time in 5-minute intervals.

1

Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 35 for details.]

2

Perform "Setting the clock" from step 1.

Advertising