Sharp XL-UH242 - Manual (Page 37)

XL-UH242 29-37.fm
37
XL-UH242
References
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
General
Amplifier
USB
CD player
Tuner
Speaker
Power source AC 120 V, 60 Hz
Power
consumption 90 W
Dimensions Width: 6-3/4" (175 mm)
Height: 9-1/2" (240 mm)
Depth: 12-1/5" (315 mm)
Weight 12.4 lbs. (5.6 kg)
Output power 90 watts minimum RMS per channel into 6
ohms from 100 Hz to 20 kHz, 10% total har-
monic distortion
Output terminals Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
200 mV/10 k ohms at 70 Hz
Input terminals Video/Auxiliary (audio signal):
500 mV/47 k ohms
Class Mass storage class
Support File MP3/WMA (do not support DRM file)
Format support FAT 16 or FAT 32
Bitrate support MP3 (32 ~ 320 kbps)
WMA (64 ~ 160 kbps)
Other MP3 lD3 - tag only supports version 1.x
USB supports version 2.0
Type 5-disc multi-play compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter 1-bit D/A converter
Frequency
response 20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
Frequency range FM: 87.5 - 108 MHz
AM: 530 - 1,720 kHz
Type 2-way type speaker system
2" (5 cm) tweeter
5-1/8" (13 cm) woofer
Maximum input
power 180 W
Rated input power 90 W
Impedance 6 ohms
Dimensions Width: 7-1/4" (185 mm)
Height: 10-1/4" (260 mm)
Depth: 9-1/16" (230 mm)
Weight 6.1 lbs. (2.8 kg/each)