Sony PEG-NX60 - Manual (Page 31)

31
Bas
ic
op
e
ra
tions
of your Sony
CLIÉ™ Han
d
h
e
ld
Functions of parts
POWER Button
Tip
When you turn on your CLIÉ handheld for the first time, the Setup screen appears
(page 22).
Note
When you cannot turn on your CLIÉ handheld, make sure that if the HOLD switch is not
in the HOLD position.
If you try to turn on your CLIÉ handheld while the HOLD switch is in the HOLD
position, the POWER LED indicator blinks green three times.
Turning off your CLIÉ handheld
Press the POWER button again.
Tip
You do not have to save data, quit an application, or perform any of the other shutdown
procedures that your computer requires.
Pressing the POWER button for more than two
seconds
You can switch on/off the backlight of the LCD.
Turning on your CLIÉ handheld
Press the POWER button.
Your CLIÉ handheld turns on and the
last screen you viewed is displayed.
When your CLIÉ handheld turns on,
the POWER LED (page 32) indicator
lights green.
POWER Button