Samsung CLX-3170FN User Manual

Page 183

Advertising
background image

Installing Printer Software in Windows

8

2.Configure an IP address, subnet mask, and gateway for the

printer manually and click Configure to set the specific IP
address for the network printer.
3.Click Next, and go to step 6.
• You can also set the network printer via SyncThruTM Web

Service, an embedded web server. Click Launch SWS on

Set IP Address window. Your machine’s embedded website

opens.

5

The list of printers available on the network appears.
Select the printer you want to install from the list and then
click Next.

• If you do not see your printer on the list, click Update to

refresh the list, or select Add TCP/IP Port to add your
printer to the network. To add the printer to the

network, enter the port name and the IP address for the
printer.

To verify your printer’s IP address or the MAC address,
print a Network Configuration page.

• To find a shared network printer (UNC Path), select

Shared Printer [UNC] and enter the shared name
manually or find a shared printer by clicking the Browse
button.

N

OTE

: If you cannot find your machine in network, please turn

off the firewall and click Update.
For Windows operating system, click StartControl Panel
and start windows firewall, and set this option unactivated. For
other operating system, refer to its on-line guide.

6

After the installation is finished, a window appears asking
you to print a test page and to register yourself as a user
of Samsung Printers in order to receive information from

Samsung. If you so desire, select the corresponding
checkbox(es) and click Finish.

Otherwise, just click Finish.

N

OTE

: After setup is complete, if your printer driver doesn’t

work properly, reinstall the printer driver. See “Reinstalling
Printer Software” on page 10.

Custom Installation

You can choose individual components to install and set a
specific IP address.

1

Make sure that the printer is connected to your network
and powered on. For details about connecting to the
network, see the supplied printer’s User’s Guide.

2

Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “X” with the
letter which represents your drive and click OK.
If you use Windows Vista, click StartAll programs
AccessoriesRun, and type X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, click
Run Setup.exe in Install or run program field, and
click Continue in the User Account Control window.

Advertising