Sharp SGH-I627 - Manual (Page 89)

Getting Connected 85
• Description: Enter a name for the connection.
• Connects to: Select a network type for which the connection is
used.
• Access point: Enter the information provided by your system
administrator.
• User name: Enter your user name for the GPRS network.
• Password: Enter your password.
• Authentication Type: Select an authentication method for GPRS
connections.
• Primary DNS: Enter the primary domain naming system (DNS)
address.
• Secondary DNS: Enter the secondary DNS address.
• IP address: Enter the Internet Protocol (IP) address.
Note: If you are not sure about the information to enter, ask your network
administrator.
5. Press the Done soft key when you are finished.
Creating a proxy connection
You can use a proxy connection to gain access to the Internet
over an existing connection to your corporate network.
1. On the Home screen, select Start ➔ More ➔ Settings ➔
Connections ➔ Proxy and press the key.
2. Highlight New in the Proxy menu list.
-Or-
3. Press the Menu soft key and select Add.
4. Enter the requested information:
• Description: Enter a name for the connection.
• Connects from: Select the type of network from which you will
connect.
• Connects to: Select the type of network to which you will connect.
• Proxy (name:port): Enter the proxy server name and port number
in the form.
• Type: Select a network type for which the proxy connection is used.
• User name: Enter your user name for the network to which you will
connect.
• Password: Enter your password.
Note: If you are not sure about the information to enter, ask your service
provider.
5. Press the Done soft key when you are finished.
Creating a VPN connection
If your company has set up a virtual private network (VPN), you
can create a VPN connection to gain access to your corporate
network over an Internet connection.
i627.book Page 85 Wednesday, February 18, 2009 3:26 PM