How do i configure tcp/ip protocol, Configuring tcp/ip on your internet devices – Scientific Atlanta DPC2505TM User Manual

Page 18

Advertising
background image

18

4015259 Rev B

How Do I Configure TCP/IP Protocol?

How Do I Configure TCP/IP Protocol?

To configure TCP/IP protocol, you need to have an Ethernet Network Interface Card
(NIC) with TCP/IP communications protocol installed on your system. TCP/IP is a
communications protocol used to access the Internet. This section contains
instructions for configuring TCP/IP on your Internet devices to operate with the
cable modem in Microsoft Windows or Macintosh environments.

Configuring TCP/IP on Your Internet Devices

TCP/IP protocol in a Microsoft Windows environment is different for each
operating system. Follow the appropriate instructions in this section for your
operating system.

Configuring TCP/IP on Windows 95, 98, 98SE, or ME Systems
1
Click Start, select Settings, and choose Control Panel.
2 Double-click the Network icon in the Control Panel window.
3 Read the list of installed network components under the Configuration tab to

verify that your PC contains the TCP/IP protocol/Ethernet adapter.

4 Is TCP/IP protocol listed in the installed network components list?

„

If yes, go to step 7.

„

If no, click Add, click Protocol, click Add, and then go to step 5.

5 Click Microsoft in the Manufacturers list.
6 Click TCP/IP in the Network Protocols list, and then click OK.
7 Click the TCP/IP Ethernet Adapter protocol, and then choose Properties.
8 Click the IP Address tab, and then select Obtain an IP address automatically.
9 Click the Gateway tab and verify that these fields are empty. If they are not

empty, highlight and delete all information from the fields.

10 Click the DNS Configuration tab, and then select Disable DNS.
11 Click OK.
12 Click OK when the system finishes copying the files, and then close all

networking windows.

13 Click YES to restart your computer when the System Settings Change dialog box

opens. The computer restarts. The TCP/IP protocol is now configured on your
PC, and your Ethernet devices are ready for use.

14 Try to access the Internet. If you cannot access the Internet, go to Having

Difficulty? (on page 25). If you still cannot access the Internet, contact your
service provider for further assistance.

Advertising
This manual is related to the following products: