Scientific Atlanta DPC2505TM - Manual (Page 29)

4015259 Rev B 29
Front Panel LED Status Indicator Functions
Front Panel LED Status Indicator Functions
Initial Power Up, Calibration, and Registration
The following chart illustrates the sequence of steps and the corresponding
appearance of the cable modem front panel LED status indicators during power-up,
calibration, and registration on the network. Use this chart to troubleshoot the power
up, calibration, and registration process of your cable modem.
Note: After the cable modem completes step 8 (Registration Complete), the modem
proceeds immediately to step 9. See the chart in Normal Operations (on page 30).
Front Panel LED Status Indicators During Initial Power-Up, Calibration, and Registration
Step 1 2 3 4 5 6 7 8
Front Panel
Indicator
Power
Up
Self
Test
Downstream
Scan
Downstream
Signal Lock
Ranging Requesting
IP Address
Registering Registration
Complete
1 POWER On On On On On On On On
2 DS 1 Blinks On
1 sec
Blinks On On On On On
DS 2-3 Blinks On 1
sec
Off Off Off Off Off ƒ On when
wideband
operation is
enabled on
that channel
ƒ Off when
wideband
operation is
not available
on that
channel
3 US Blinks On
1 sec
Off Off Blinks On On On
4 ONLINE Blinks On
1 sec
Off Off Off Off Blinks On
5 LINK Off On
1 sec
Off - When no devices are connected to the Ethernet or USB ports
On - When devices are connected to the Ethernet or USB ports
Blinks - When data activity is present On