Samsung HT-DB1750 - Manual (Page 9)

Press AUX on the remote control to select AUX 1 or AUX 2.
• Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD
➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
Connect Audio In on the DVD player to Audio Out on the external analog component.
• Be sure to match connector colors.
1
2
VOLTAGE
SELECTOR
VIDEO OUT VIDEO IN COMPONENT VIDEO OUT
L R
16
Example: Analog signal components such as a VCR, Camcorder, and TV.
Connecting an External Analog Component
Audio Cable
If the external
analog component
has only one Audio
Out, connect either
left or right.
15
CONNECTIONS
Press AUX on the remote control to select ‘DIGITAL IN’.
• Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD
➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
Connecting External Components
Connect the Digital Input (OPTICAL) to the Digital Output on the external
digital component.
1
2
VOLTAGE
SELECTOR
DIGITAL OUT
Example: Digital signal components such as a DVD or CD Recorder.
Connecting an External Digital Component
Optical Cable
(not included)
The AC Cord must be plugged into an appropriate
socket.
Before plugging your system into an AC outlet, you must
check the voltage.
Check the position of the voltage selector on the rear of the
system
(OPTIONAL).
1. Plug the AC Cord on the rear of the system into an
appropriate outlet.
2. Press the On/Standby button to switch your DVD Player
system on.