Resetting sound fields to the initial settings, Tuner operations, Listening to fm/am radio – Sony STRDG510 User Manual
Page 52: Resetting sound fields to the initial, Settings, Press ? / 1 to turn off the power, While holding down 2ch, press ? / 1
52
GB
Resetting sound fields to
the initial settings
Be sure to use the buttons on the receiver for
this operation.
1
Press ?/1 to turn off the power.
2
While holding down 2CH, press
?/1.
“S.F. CLR.” appears on the display and
all sound fields are reset to their initial
setting.
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver (page
25).
Tip
The tuning scale for direct tuning differs depending
on the area code as shown in the following table. For
details on area codes, see page 3.
* The AM tuning scale can be changed (page 68).
?/1
AUTO CAL MIC
SPEAKERS
(OFF/A/B)
PHONES
MEMORY/
ENTER
TUNING
MODE
TUNING
2CH
A.F.D.
MOVIE
MUSIC
AUTO CAL
DIRECT
DISPLAY
INPUT MODE
INPUT SELECTOR
MASTER VOLUME
1,2
2
Tuner Operations
Area code
FM
AM
U, CA
100 kHz
10 kHz*
CEL, CEK, AU, TW,
KR, TH6, SP
50 kHz
9 kHz
E2
50 kHz
9 kHz*