Samsung 895M User Manual

Quick setup guide, Ez record, Getting connected

Advertising
background image

English-1

Quick Setup Guide

HDD & DVD RECORDER

DVD-893M/895M/897M

1

EZ Record

2

Getting Connected

3

DTV Functions

4

Basic Operation

EZ Record

This function allows you Initialise and Finalise a disc automatically.
(Refer to page 48 of the Instruction Manual for more information.)

With the unit in Stop mode, press the MENU button.

Press the  buttons to select Setup, then press the OK or ► button.

Press the  buttons to select Recording, then press the OK or ► button.

Press the  buttons to select EZ Record, then press the OK or ► button.

Press the  buttons to select On, then press the OK or ►

button.

Press the EXIT button to exit the menu.

Insert

a

disc.

If the disc is new, it is initialised to V mode automatically. (DVD-RW only)

Press the REC button.

1

1.

2.

3.

4.

5.

6.

7.

Recordable Discs
DVD-RAM/±RW/±R

Getting Connected

Select one of the following three types of connections :

The VHF/UHF RF OUT jack of this product sends only signals received through the antenna.

It does not output audio/video signals.
You must use one of the following connections on this unit.

Antenna + HDD & DVD Recorder + TV

You can connect your HDD & DVD Recorder to the
television using the SCART cable if the appropriate input is
available on the television. You thus:

Obtain better quality sound and pictures
Simplify the setting up procedure of your HDD & DVD Recorder

Connect the RF cable as shown.

Connect one end of the SCART cable to the AV1 jack

on the rear of the HDD & DVD Recorder. Also use the

Video/Audio Cable to connect AUDIO OUT(R/L)/VIDEO

OUT jacks on the HDD & DVD Recorder to the Audio &

Video jacks on the TV.

For the best picture quality, if your TV has Component
video jacks, you can use component cables instead of
the yellow video connector on the Video/Audio cable. If
your TV has a HDMI or DVI jack, you can use the HDMI
or HDMI-DVI cable instead of the yellow video
connector on the Video/Audio cable.

If you have an AV amplifi er

Connect either audio cables from the AUDIO OUT(R/L) jacks on

the HDD & DVD Recorder to the AUDIO IN jacks on your AV
amplifi er, or a digital cable from the DIGITAL AUDIO OUT
(OPTICAL) jack on the HDD & DVD Recorder to the DIGITAL
AUDIO IN jack on your AV amplifi er.

2

C Samsung Electronics

To RF IN

To RF OUT

RF Cable

To ANT INPUT

AV amplifier (receiver)

HDD & DVD Recorder

TV

OR

OR

OR

OR

Advertising