Changing connection information – Samsung SCH-i730 User Manual

Page 161

Advertising
background image

Section 12: Bluetooth and Wi-Fi Services

161

Changing Connection Information

Section 12

displays.

2. To connect to other Wi-Fi network, tap and hold SSID of

the Wi-Fi network you want, then select Connect in pop
up menu.

3. In the Networks to access box, tap the type of network

you want to connect to (All Available, Only access
points, or Only computer-to-computer).

4. To connect only to networks that have already been

configured, clear the Automatically connect to non-
preferred networks checkbox, if necessary.

Note: If you check the Automatically connect to non-preferred networks
checkbox, your Pocket PC will detect any new networks and provide you
the opportunity to configure them.

5. Tap

to return to the Connections screen.

Changing Connection Information

Using either the Wireless or Network Adapters tabs
under “Network Card,” you can change your connection
information. If your Wi-Fi network encrypts data with a
security key (WEP) or you need WPA authentication to
connect to your Wi-Fi network, you can set the
configurations under Wireless tab. The Network
Adapters tab allows you to choose whether you use a
fixed IP or the DHCP (Dynamic Host Control Protocol).

To get connection information of Wi-Fi network that you
are connected to, follow these steps:

1. Tap Start located in the upper left corner of the screen.

2. Tap Settings, then tap the Connections tab.

Advertising
This manual is related to the following products: