Samsung SCH-i730 - Manual (Page 41)

Section 3: Call Functions 41
Voice Signal
Section 3
5. Read the description until you are comfortable to
proceed, then tap OK.
Your phone displays the first digit sequence and “Please
say” plays through the speaker followed by the four
digits appearing in the display.
6. Wait for the beep and repeat the digits using your normal
tone of voice.
7. After a moment, the phone plays back the recording and
prompts “Did the recording sound ok?” If the recording
was good, say “Yes.” If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then re-record.
Repeat this step until you’re satisfied with the recording.
8. After confirming that a recording sounds ok, repeat the
recording process with the next set of digits until all
sequences have been completed.
9. After the final sequence, the phone prompts “Adaptation
complete.”
Reset Digit Dial Adaptation
This option erases an adaptation and resets Digit Dial to
its original state.
1. In standby mode, press and hold the key on the right
side of your phone.
2. Tap Settings.
Note: Reset Digits is only available if you have adapted digit dial for your
voice.