Sony PEG-UX40 - Manual (Page 33)

33
Sony Personal Entertainment Organizer PEG-UX50/UX40 4-676-072-11 (1)
Bas
ic
operations
of your CLIÉ™ h
a
ndheld
Performing a hard reset
If the soft reset does not solve the problem, you will need to perform a hard
reset to restart your CLIÉ handheld.
Notes
• All records and add-on applications stored on your CLIÉ
handheld will be erased by performing a hard reset. (All records
and add-on applications stored on Internal Media will be retained.)
• Perform a hard reset only if a soft reset does not solve the problem.
However, you can restore your CLIÉ handheld data if it was saved in Power
Saving Mode (page 30).
You can also restore the data if you have made a backup on your computer via
the HotSync
®
operation.
1
Slide down and hold the POWER/HOLD switch.
2
Press the RESET button gently with the stylus, and then
release the stylus.
Note
Keep the POWER/HOLD switch held down.
3
Wait for more than three seconds after the palm
POWERED
screen is displayed, and release the POWER/
HOLD switch.
A message “Erase all data?” is displayed.
Continued on next page
• • • • • • • • • • • • • • • • • • • • •
01US01COV.book Page 33 Friday, July 11, 2003 1:15 PM