Samsung MAX-T35 - Manual (Page 10)

GB
19
GB
18
If the timer switch on and off times are identical, the word ERROR is
displayed. The timer enables you to switch the system on or off at
specific times.
Example:
You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Switch the system on by pressing STANDBY/ON .
Press TIMER/CLOCK until TIMER is displayed.
Press ENTER .
Result: ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
Set the timer switch-on time.
a Set the hour by tuning the MULTI JOG knob to the right or to the
left.
b Press ENTER .
Result: The minutes flash.
c Set the minutes by tuning the MULTI JOG knob to the right or to
the left.
d Press ENTER .
Result: OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
Set the timer switch-off time.
a Set the hour by tuning the MULTI JOG knob to the right or to the
left.
b Press ENTER .
Result: The minutes flash.
c Set the minutes by tuning the MULTI JOG knob to the right or to
the left.
d Press ENTER .
Result: VOL XX is displayed, where XX corresponds to the
volume already set.
Press TUNING Down and Up to adjust the volume level and press
ENTER .
Result: The source to be selected is displayed.
Turn the MULTI JOG knob to select the source to be played when
the system switches on.
If you select... You must also...
TAPE (cassette) Insert a recorded cassette in one of
the decks before setting the
system to standby.
TUNER (radio) a Press ENTER .
b Select a preset station by tuning
the
Multi Jog knob to the right or
to the left.
CD (compact disc) Load one or more compact discs.
Press ENTER to confirm the timer.
Press STANDBY/ON to set the system to standby mode.
Result: is displayed to the top of the time, indicating that the timer
has been set. The system will switch on and off automatically
at the required times.
Timer Function
7
8
9
5
6
1
2
3
4
After having set the timer, it will start automatically as shown
by the TIMER indication on the display. If you no longer wish
to use the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To... Press Timer-On/Off...
Cancel the timer Once.
Result: is no longer displayed.
Restart the timer Twice.
Result: is displayed again.
Cancelling the Timer
To set the timer function
You may use / buttons on the front panel to adjust in
step 4 , 5 , 6 , 7 .
2
1,9
3,4,5,6,7,8
4,5,6,7 4,5,6,7
You can record a radio program of your choice.
You can only record on cassettes in TAPE2.
You do not need to adjust the volume, as it has no effect on
the recording.
Switch the system on by pressing STANDBY/ON .
Insert a blank cassette in TAPE2.
Select the TUNER function by pressing TUNER .
Select the radio station that you wish to record by pressing Tuning
or on the remote control or by press the Tuning Down or
Up on the front panel.
Press REC/PAUSE .
Result: REC is displayed in red and recording starts.
To stop recording, press .
You can copy a cassette from TAPE1 to TAPE2.
Normal speed dubbing in selecting Tape function mode.
You do not need to adjust the volume, as it has no effect on the
recording.
Take care not to insert the tape to be copied in TAPE2, as it will
be erased when you start recording.
Switch your system on by pressing STANDBY/ON .
Insert a blank cassette in TAPE2.
Insert the tape to be copied in TAPE1.
To copy a cassette at... Press...
Normal speed DUBBING
Result: The appropriate indications are displayed and the cassette in
TAPE1 is copied to the cassette in TAPE2.
To stop dubbing, press .
Recording a Radio Program
1
2
3
4
5
6
Copying a Cassette (Dubbing)
1
2
3
4
5
4
5
1
1
5
6
3
4 4
When playing a cassette in one of the cassette decks, a
counter is displayed to enable you to take note of the counter
value at the start of each track to start playback at the
beginning of the track to which you wish to listen.
Before starting to record a cassette for which you wish to take
note of the counter values at the beginning of each track, reset
the counter by pressing COUNTER RESET .
Each cassette Tape has a separate counter.
Tape Counter
REC / PAUSE TAPE 1/2
TAPE
COUNTER RESET
MO / ST DEMO DIMMER
A I SLEEP SHUFFLE CD REPEAT
TIMER ON / OFF TIMER / CLOCK PROGRAM / SET
REC / PAUSE TAPE 1/2 COUNTER RESET
MO / ST DEMO DIMMER
AL SLEEP SHUFFLE CD REPEAT
TIMER ON / OFF TIMER / CLOCK PROGRAM / SET
OPEN/CLOSE
DISC
SKIP POWER
MAX-T35 GB noR 15~23-1 4/21/06 8:2112:0 Page 16