Using the optical disc drive – Sony VGN-TX00 User Manual

Page 32

Advertising
background image

32

n

N

Using Your VAIO Computer

Using the Optical Disc Drive

Your computer is equipped with an optical disc drive.

To insert a disc

1

Turn on the computer.

2

Press the drive eject button (1) to open the drive.
The tray slides out.

If power supply to the optical disc drive is disabled by VAIO Power Management, it will take a while to eject the drive tray. Note that the substitute drive
eject button is disabled when the optical disc drive is not powered.
When recovering your system, turn on the computer and press the substitute drive eject button on the optical disc drive. Insert your Recovery Disc
into the optical disc drive, turn off the computer, and then turn on the computer again to launch the VAIO Recovery Wizard.

3

Place a disc in the middle of the tray with the label side facing up until the disc clicks into place.

Advertising
This manual is related to the following products: