Symbol Technologies PL460 - Manual (Page 8)

8 PL360/460 Cradle
Troubleshooting
If the cradle does not work after following the operating instructions in this guide:
• check the system power.
• check for loose cable connections.
• ensure the scanner is sitting properly in the cradle.
Cleaning
Wipe the cradle periodically with a lens tissue or other material suitable for
cleaning optical material, such as eyeglasses.
Regulatory Information
All Symbol devices are designed to be compliant with rules and regulations in locations they
are sold and are labeled as required.
Any changes or modifications to Symbol Technologies equipment, not expressly approved by
Symbol Technologies, could void the user's authority to operate the equipment.
Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be
dry before connecting to an external power source.
Country Approvals
Regulatory markings are applied to the device signifying the device is approved for use in the
following countries: United States, Canada, Australia, Japan and Europe.
Please refer to the Symbol Declaration of Conformity (DoC) for details of other country
markings. This is available at
http://www2.symbol.com/doc/ .
Operation of the device without regulatory approval is illegal.
Health and Safety Recommendations
Ergonomic Recommendations
- Reduce or eliminate repetitive motion.
- Maintain a natural position.
- Reduce or eliminate excessive force.
- Keep objects that are used frequently within easy reach.
- Perform tasks at correct heights.
CAUTION Do not pour, spray or spill any liquid on the cradle.
CAUTION Only use Symbol approved and UL Listed accessories, battery packs and
battery chargers.
CAUTION In order to avoid or minimize the potential risk of ergonomic injury follow the
recommendations below. Consult with your local Health & Safety Manager
to ensure that you are adhering to your company's safety programs to
prevent employee injury.