Samsung HT-Q9 - Manual (Page 10)

GB
18
OPERA
TION
To stop playback, press STOP during playback.
• If pressed once, “ PRESS PLAY” is displayed and the stop position will be
stored in memory. If PLAY/PAUSE ( ) button or ENTER button is
pressed, playback resumes from the stop position. (This function works only
with DVDs.)
• If pressed twice, “ STOP” is displayed, and if PLAY/PAUSE ( ) button is
pressed, playback starts from the beginning.
To temporarily pause playback, press PLAY/PAUSE
during playback.
• To resume playback, press PLAY/PAUSE ( ) button again.
DVD VCD CD
• Playback starts automatically.
Selecting the Video Format
Press and hold NT/PAL button on the remote controller for over 5 seconds
while the power is turned off.
• By default, the video format is set to "PAL".
• " NTSC" or "PAL" will appear in the display. At this time, press the NT/PAL button
shortly to select between " NTSC" and "PAL".
• Each country has a different video format standard.
• For normal playback, the video format of the disc must be the same as the video
format of your TV.
Disc Playback
2 Load a disc.
• Place a disc gently into the tray with the disc’s label
facing up.
• Depending on the content of
the disc, the initial screen may
appear different.
1 Press OPEN/CLOSE button to open the
disc tray.
3 Press OPEN/ CLOSE button to close
the disc tray.
Note
17
• In this manual, the instructions marked with "DVD ( )" are applicable
to DVD-VIDEO and DVD-R/RW discs.
Where a particular DVD type is mentioned, it is indicated separately.
• Depending on the content of the disc, the initial screen may appear different.
DVD Note
Titles and chapters (DVD-VIDEO)
• DVD-video is divided into several large sections called "titles" and smaller sections called "chapters".
Numbers are allotted to these sections.
These numbers are called "title numbers" and "chapter numbers".
TITLE 1 TITLE 2
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2 CHAPTER 3
Tracks (Video and music CDs)
• Video and music CDs are divided into sections called "tracks".
Numbers are allotted to these sections. These numbers are called "track numbers".
TRACK 1 TRACK 2 TRACK 4 TRACK 5 TRACK 3
Files (DivX)
• DivX is divided into sections called "files".
Numbers are allotted to these sections. These numbers are called "file numbers".
FILE 1 FILE 2
Disc terminology
Before Using Your Home Theater
HT-Q9(1~40P) GB 2006.5.8 4:18 PM Page 20