Sony CDX-S2010T - Manual (Page 7)

7
With the card remote commander
In step 3, to adjust the selected item, press
<, M, ,
or m.
Adjusting setup items
— SET
1
Press and hold (SEL).
The setup display appears.
2
Press (SEL) repeatedly until the
desired item appears.
3
Press the volume +/– button to select
the setting (example “ON” or “OFF”).
4
Press and hold (SEL).
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In step 2, to select the setup item, press
M or m. In
step 3, to select the setting, press < or ,.
The following items can be set (follow the page
reference for details):
“
z
” indicates the default settings.
*1 When the unit is turned off.
*2 When the audio output is set to “SUB.”
Using optional remote
commanders
Card remote commander
RM-X114
Location of controls
The corresponding buttons on the card remote
commander control the same functions as those
on this unit.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
• SOUND button
The same as (SEL) on the unit.
• </, (SEEK –/+) buttons
To control radio/CD, the same as (SEEK)
+/– on the unit. (For details of other operations,
see “With the card remote commander” on each
pages.)
• M/m (DISC*/PRESET +/–) buttons
For details, see “With the card remote
commander” on each pages.
* Not available for this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
CLOCK-ADJ
(Clock Adjust) (page 4)
BEEP To set “BEEP-ON” (
z
) or
“BEEP-OFF.”
SUB/REAR * 1 To switch the audio output.
– “SUB” (
z
): to output to a
subwoofer.
– “REAR”: to output to a
power amplifier.
DIM (Dimmer) To change the brightness of the
display.
– “DIM-ON”: to dim the
display.
– “DIM-OFF” (
z
): to
deactivate the dimmer.
ILM-1/ILM-2
(Illumination)
(CDX-S2010C
only) To change the illumination
colour.
– “ILM-1” (
z
): Amber
– “ILM-2”: Green
DEMO * 1
(Demonstration)
To set “DEMO-ON” (
z
) or
“DEMO-OFF” (page 4).
LPF * 2 (Low
Pass Filter)
To select the cut-off frequency
“78HZ,” “125HZ” or “OFF”
(
z
).
continue to next page t
DISC –
ATT OFF
DSPL MODE
SOURCE
DISC +
VOL
+
–
PRESET +
SEEK + SEEK –
PRESET –
SOUND
ENTE
R
MENU
LIST
MODE
LIST *
ENTER *
ATT
DSPL
MENU *
SOURCE
</,
(SEEK –/+ )
SOUND
OFF
VOL (+/ –)
m/M
(DISC
* /
PRESET
+/ –)