13 connecting an av device using a d-sub cable, Connecting an av device using a d-sub cable -13 – Samsung SPH SP-M220 User Manual
Page 29
Advertising
Installation and Connection
2-13
2-13 Connecting an AV device using a D-Sub cable
Make sure that the AV device and your projector are turned off.
1.
Connect the [PC IN] terminal at the back of the projector to the D-Sub terminal of your AV device using a D-Sub cable.
- For supported input signal formats, resolutions, and frequencies, see AV Timing (D-Sub) in Section 2-8, "Supported Display
Modes".
2.
Connect the [
AUDIO IN (L-AUDIO-R)
] terminal at the back of the projector to the Audio out terminal of your AV device using
an audio cable (Not supplied).
Advertising
This manual is related to the following products: