15 connecting using a video cable, Connecting using a video cable -15 – Samsung SPH SP-M220 User Manual
Page 31
Advertising
Installation and Connection
2-15
2-15 Connecting using a Video cable
Make sure that the AV device and your projector are turned off.
1.
Connect the AV device to the
[VIDEO]
port using a VIDEO cable (not supplied).
- For supported input signal formats, see AV Timing (VIDEO) in section 2-8, "Supported Display Modes".
2.
Connect the [
AUDIO IN (L-AUDIO-R)
] terminal on the back of the projector and the Audio out terminal on your AV device
using an audio cable (Not supplied).
Advertising
This manual is related to the following products: