Sony NAC-SV10I - Manual (Page 14)

14 GB
Preparing the unit and the remote control
Connecting an amplifier and the AC power adaptor
You can listen to the playback sound of the unit from an external component, such as an amplifier, stereo
system, etc., connected to the AUDIO OUT jacks on the unit.
Use an audio connecting cord with two phono plugs (optional) to connect the AUDIO OUT jacks on the
unit and the audio input jacks of the external component.
Note
If you place the unit in an unstable location, it may move when you connect or disconnect cables. Hold the unit firmly
when you connect or disconnect cables.
To a wall
outlet
Audio connecting cord
WARNING
DO NOT plug the AC power adaptor into a wall
outlet until all other connections have been made.
AC power
adaptor
1 2
To the audio input
jacks of an
amplifier
To the DC IN
6 V jack
To the AUDIO OUT L/R jacks
External
component