With wps, 3 of “i, E 27) – Sony NAC-SV10I User Manual

Page 27

Advertising
background image

27

GB

Ne
twor

k co

nne

ction

s

2

When “Playback and network
functions cannot be used during the
setup. Press ENTER to continue.”
appears, press ENTER.

When “

” is displayed, the message is

continued to the next page. Press

m to see the

entire text string.

3

Select “Connection Method.”

The “Connection” display appears.
If you are performing the initial setup
operation and indicated that you want to set
the network connection (page 20), this
display appears.

4

Select “Wireless LAN.”

5

Select “Manual Registration” -
“Direct Input.”

6

Enter the network name (SSID), and
then press ENTER.

For details on how to input characters, see
“Entering text” (page 18).

7

Select the security setting from the
“Security Setting” display.

You can select from “WPA/WPA2-PSK
(AES),” “WPA/WPA2-PSK (TKIP),”
“WEP,” or “None.”

Note

If you select “None,” the unit skips step 8 and goes
to step 9.

8

Enter the security key (WEP Key,
WPA/WPA2 Key) of your network,
and then press ENTER.

For details on how to input characters, see
“Entering text” (page 18).
The security key appears as “*****”.

9

When “Save settings and check
connection. Press ENTER to
continue.” appears, press ENTER.

It may take a while for the unit to complete
the network settings.
When the network settings have been
completed, “Complete.” appears and

lights up on the display.
If you are making the initial settings, the
“Date&Time” display, step 5 of “Performing
initial setup operations,
” appears. Go back to
page 21 and continue the initial setting
process.

10

Make the server settings.

To listen to audio content stored on the server
through the network that have set up in this
section, you need to set up your server
(page 35).

Setting up a wireless
network using an access
point compliant with WPS

You can easily set up a wireless network using an
access point compliant with WPS. WPS setting can
be made either by the push-button configuration
method or the PIN (Personal Identification
Number) code method.

What is WPS (Wi-Fi Protected
Setup)?

WPS is a standard created by the Wi-Fi Alliance
allowing you to setup a wireless network easily
and securely.

Setting up a wireless network
using the WPS push button
configuration method

You can easily set up a WPS wireless connection
with one push of the designated button.

1

Press

SETTINGS

to enter

the

settings menu and select “Network
Settings.”

2

When “Playback and network
functions cannot be used during the
setup. Press ENTER to continue.”
appears, press ENTER.

When “

” is displayed, the message is

continued to the next page. Press

m to see the

entire text string.

3

Select “Connection Method.”

The “Connection” display appears.
If you are performing the initial setup
operation and indicated that you want to set
the network connection (page 20), this
display appears.

4

Select “Wireless LAN.”

5

Select “WPS Push.”

Advertising