Sony NAC-SV10I User Manual

Page 34

Advertising
background image

34

GB

Remote UI mode - off (factory setting):
You can use the buttons and controls on your
iPod/iPhone to operate it. You can also use
some buttons on the unit and the remote control,
but the iPod/iPhone content lists are not
displayed on the unit.

Note

You cannot use the buttons and controls on your iPod/
iPhone in the remote UI mode - on mode.

To change the operation mode, do the following.

1

While the iPod & iPhone function
is selected, press OPTIONS to
enter the options menu.

2

Select “Remote UI Mode.”

3

Select “On” or “Off” ( ).

(

: Factory setting)

To use the unit as a battery
charger

You can use the unit as a battery charger for an
iPod/iPhone. The charging begins when the iPod/
iPhone is placed on the iPod/iPhone dock. An
iPod/iPhone can be charged when:

the unit is turned on.

the unit is turned off (in standby status) in the
network standby - on mode.

To stop charging the iPod/iPhone

Remove the iPod/iPhone from the unit.

Notes

An iPod/iPhone cannot be charged when the unit is
turned off (in standby status) and in the network
standby - off mode. For details on the charging status,
refer to the operating manual of your iPod/iPhone.
Charging is possible while the AC power adaptor of the
unit is connected to a wall outlet.

When placing or removing the iPod/iPhone, handle the
iPod/iPhone at the same angle as that of the iPod/
iPhone connector on the unit and do not twist or turn the
iPod/iPhone to prevent connector damage.

Do not carry the unit with an iPod/iPhone set on the
iPod/iPhone dock. Doing so may cause a malfunction.

When placing or removing the iPod/iPhone, brace the
unit with one hand and take care not to press the
controls of the iPod/iPhone by mistake.

To change the volume level, adjust the volume on the
amplifier (you can use the AMP VOL +/– button on the
remote control to control the Sony amplifier). The
volume level does not change when adjusted on the
iPod/iPhone. For details on the remote control settings
required to operate the Sony amplifier, see “Setting up
the Sony amplifier
” (page 19).

The iPod/iPhone dock on the unit is designed for an
iPod/iPhone only. You cannot connect any other
portable audio players.

To use an iPod/iPhone, refer to the operating manual of
your iPod/iPhone.

Sony cannot accept responsibility in the event that data
recorded on the iPod/iPhone is lost or damaged when
using an iPod/iPhone with this unit.

If the album shuffle mode is set on the iPod/iPhone,
“SHUF” lights up on the display when you connect the
iPod/iPhone to the unit. If the album shuffle repeat
mode is set on the iPod/iPhone, “SHUF” and “REP”
light up on the display. (Note that this happens only
when “Remote UI Mode” is set to “On.”) For details on
the play mode of the unit, see page 45.

When the album shuffle mode or album shuffle repeat
mode is set on the iPod/iPhone, the shuffle mode
remains active but the unit does not shuffle tracks after
you set the iPod/iPhone on the unit. If you want to
shuffle tracks, set the play mode of the iPod/iPhone to
shuffle or shuffle repeat mode.

Advertising