Sony NAC-SV10I - Manual (Page 39)

39 GB
E
n
jo
yi
ng aud
io
co
nte
n
t
• Press and hold M/m so that the currently
selected item number and the total number
of items in a list appear on the display and
you can scroll the list rapidly.
• Press BACK to go to the next higher
directory.
• Press ENTER to go to the next lower
directory.
5
Select the track you want to play
and press ENTER.
The unit starts playing the selected track and
the playback display appears.
Make sure that there is sound output from the
connected amplifier.
Tips
• If you select a folder (such as an artist folder, genre
folder, etc.) and press the N button, the unit plays all
items in the selected folder.
• The track on the server that was playing when the unit
was last turned off will start playing again when the unit
is turned on again (only if the AC power adaptor of the
unit was not disconnected from the wall outlet).
Notes
• Tracks that the unit cannot play appear on the display as
well. You cannot sort a list of playable tracks.
Tracks that cannot be played on the unit are skipped
during playback.
• If you disconnect the AC power adaptor from the wall
outlet, any information on the track on the server that
was playing when the unit was last turned off will be
erased.
• It may take a while for the display to change while the
unit is searching for an item in a folder that contains a
large amount of audio content. When you search for an
item in a folder that has large amount of audio content,
you can search for an item using a keyword (page 46).
Other operations
*
1
If you change the playback range while the unit is
playing a track, the playback will stop once when you
select the playback range, then start playing the same
track again from the beginning.
*
2
When you set “Playback Range” to “Current Folder” or
“Parent Folder,” the unit plays audio content as
follows.
• When you select “Current Folder,” the unit plays
tracks in the current folder.
• When you select “Parent Folder,” the unit plays:
– tracks in the parent folder.
– tracks in folders contained in the parent folder.
Track name Artist name
Elapsed time Track (item)
number Codec
To Do the following
Pause playback Press X during playback.
Press N to resume
playback.
Stop playback Press x.
Find a point in a track Press and hold m/M
(./> on the main
unit) during playback and
release it at the desired
point.
Find the beginning of
the previous/next track Press ./> repeatedly.
Reselect the item you
want to play Press BACK repeatedly
until the desired directory
appears.
Or press OPTIONS, select
“To Server Top,” and then
select the item.
To go back to the playback
display, press OPTIONS
and select “Now Playing.”
Change the playback
range*
1
*
2
Press OPTIONS and select
“Playback Range.” You can
select the playback range
from “Current Folder”
(factory setting) or “Parent
Folder.”
When one of these
playback range settings is
selected,
lights up on
the display.
Check the details of
the selected item Press OPTIONS and select
“Information.” You can see
the detailed information of
the selected item (content,
folder, server, etc.).
View various
information while the
playback display
appears*
3
Press DISPLAY
repeatedly. You can check
the album name and the
clock.