Sony VIDEO Plus RDR-HX720 - Manual (Page 23)

23
H
ook
up
s and
Se
tti
n
gs
Connecting to a Satellite or Digital Tuner
Connect a satellite or digital tuner to this recorder using the LINE 3/DECODER jack.
Disconnect the recorder’s mains lead from the mains when connecting the tuner.
To use the Synchro-Rec function, see below. Do NOT set “Line3 Input” of the “Scart Setting”
to “Decoder” in the “Video” setup when making this connection.
If the satellite tuner can output RGB
signals
This recorder accepts RGB signals. If the
satellite tuner can output RGB signals,
connect the TV SCART connector on the
satellite tuner to the LINE 3/DECODER jack,
and set “Line3 Input” of “Scart Setting” to
“Video/RGB” in the “Video” setup
(page 88). RGB signal images can be
displayed on the TV screen, but cannot be
recorded. Note that this connection and setup
disable the SMARTLINK function. If you
want to use the SMARTLINK function with
a compatible set top box, see the instructions
supplied with the set top box.
If you want to use the Synchro Rec
function
This connection is necessary to use the
Synchro-Recording function. See
“Recording from connected equipment with a
timer (Synchro Rec)” on page 49.
Set “Line3 Input” of “Scart Setting” in the
“Video” setup (page 88) according to the
specifications of your satellite tuner. See your
satellite tuner’s instructions for more
information.
If you are using a B Sky B tuner, be sure to
connect the tuner’s VCR SCART jack to the
LINE 3/DECODER jack. Then set “Line3
Input” of “Scart Setting” according to the
specifications of the VCR SCART jack on
your satellite tuner.
b Notes
• Synchro-Recording does not work with some
tuners. For details, see the tuner’s operating
instructions.
• If you disconnect the recorder’s mains lead, you
will not be able to view the signals from the
connected tuner.
TV
to SCART input
SCART cord (not supplied)
Satellite tuner,
CanalSat, etc.
DVD recorder
to i LINE 1 – TV to i LINE 3/DECODER