D.1.3 nonfunctioning adapter leds, D.2 la-5030 pc card troubleshooting tips, D.2.1 the mu cannot associate to the access point – Symbol Technologies LA-5030 User Manual
Page 104: D.2.3 nonfunctioning adapter leds
LA-5030 PC Card & LA-5033 PCI Adapter
D-2
D.1.2 Degraded performance from the LA-5033 WLAN PCI adapter
•
Verify a secure antenna connection on the LA-5033 adapter. Verify the antennas remain
attached to the LA-5033 adapter if Diversity is selected.
D.1.3 Nonfunctioning Adapter LEDs
•
Verify the Card Type parameter is set correctly.
•
Verify that the adapter ESSID matches the ESSID of the AP.
D.2 LA-5030 PC Card Troubleshooting Tips
Use the tools provided by Windows 2000 and XP to diagnose problems
D.2.1 The MU cannot associate to the access point
•
If there is no network available using the default ESSID of 101 the task tray icon displays as
unassociated. Select Start->Settings->Control Panel->System and display the System
Properties window. Select the Hardware tab and Device Manager. Refresh the system to
detect the new hardware and then use the Configuration Utility
Find WLANs page to detect the networks available to the adapter for association.
•
Verify the adapter ESSID matches the ESSID of the AP.
•
Verify the security settings set for the access point match those configured for the MU.
D.2.2 Degraded performance from the LA-5030 5033 WLAN PCI adapter
•
Verify the a secure antenna position connection on of the LA-5030 5033 adapter.Verify the
antennas remain attached to the LA-5030 adapter if Diversity is selected.
D.2.3 Nonfunctioning adapter LEDs
•
Verify the Card Type parameter is set correctly.
•
Verify the adapter ESSID matches the ESSID of the AP.