Refilling the water tank – Sharp KC-C150U User Manual

Page 13

Advertising
background image

ENGLISH

F

R

A

N

Ç

A

IS

E

S

P

A

Ñ

O

L

REFILLING THE WATER TANK

The unit can be used in the Clean Air Mode without

putting water in the Water Tank. When using the

Clean Air & Humidify Mode, or the Quick Clean Mode,

the Water Tank should be filled with water.

2

1

3

Remove the Water Tank by unlatching the

top.

Remove the Water Tank Cap and care-

fully fill the Water Tank with tap water.

• Change the water in the Water Tank every day with

fresh tap water.

After filling, securely tighten the Tank Cap.

• Check to see that there is no water leaking.

• Be sure to wipe off any excess water on the outside of

the Water Tank.

• When carrying the Water Tank, hold it with both hands

so that the Water Tank opening is facing up.

Replace the Water Tank in the unit.

• The top latch will “click” in place when the Water Tank

is properly installed.

4

CAUTION

Tank Handle

Water Tank

Tank Cap

Water Tank

E-11

Humidifying
Tray

tighten

• Do not expose the unit to water. Short circuit and/or electrical shock may occur as a result.

• Do not use hot water (104ºF or 40ºC), chemical agents, aromatic substances, dirty water, or

other damaging substances, deformation and/or malfunction may occur.

• Use only fresh tap water. Use of other water sources may promote the growth of mold, fun-

gus and/or bacteria.

KC-C150U_Eng_N.indd 13

07.11.7 1:25:42 PM

Advertising