Samsung Digimax 330 - Manual (Page 15)

English - 
Changing Channels
Using the Channel Buttons
1. Press the Ch< or Ch> button to change channels.
When you press the Ch< or Ch> button, the TV changes channels in
sequence.
You will see all the channels that the TV has memorized. (The TV must have
memorized at least three channels.) You will not see channels that were either
erased or not memorized. See page 15 to memorize channels.
Using the Number Buttons
1. Press the number buttons to go directly to a channel. For example, to select
channel , press , then .
For quick channel change, press the number buttons, then press the ENtER
button.
Using the PRE-Ch Button to select the Previous Channel
1. Press the PRE-Ch button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel. Then
use the PRE-Ch button to quickly alternate between them.
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENtER button.
2. Press the ENtER button again to select “Plug & Play”.
For further details on setting up options, refer to the pages 12.
The “Plug & Play” feature is only available in the TV mode.
Adjusting the Volume
Using the Volume Buttons
1. Press the VOL
-
or VOL
+
button to increase or decrease the volume.
Using the MUtE button
At any time, you can cut off the sound using the
MUtE button.
1. Press MUtE button and the sound cuts off.
" " is displayed on the screen.
2. To turn mute off, press the MUtE button again or simply press the
VOL
-
or VOL
+
button.
Setup
Plug & Play ►
Language : English ►
time ►
Caption ►
Melody : Off ►
Entertainment : Off ►
Energy Saving : Off ►
AV Color System : Auto ►
PIP ►
tV
Move Enter Return
BN68-01514E-00Eng.indd 13 2008-04-08 ¿ААь 11:29:47