Samsung Digimax 330 - Manual (Page 26)

English - 4
Setting the Blue Only Mode
This function is for AV device measurement experts. This function displays the blue signal
only by removing the red and green signals from the video signal so as to provide a Blue
Filter effect that is used to adjust the Color and Tint of video equipment such as DVD
players, Home Theaters, etc.
Using this function, you can adjust the Color and Tint to preferred values appropriate to
the signal level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow
Color Bar Patterns, without using an additional Blue Filter.
1. Follow the “Activating Picture Options” instructions numbers 1 and 2.
(Refer to page 21).
2. Press the ▲ or ▼ button to select "Blue Only Mode", then press the ENtER button.
3. Press the ▲ or ▼ button to select "Off" or "On", then press the ENtER button.
Press the ExIt button to exit.
“Blue Only Mode” is available when the picture mode is set to “Movie” or
“Standard”.
Resetting the Picture Settings to the factory Defaults
1. Press the MENU button to display the menu.
Press the ENtER button, to select “Picture”.
2. Press the ▲ or ▼ button to select "Reset", then press the ENtER button.
Press the ▲ or ▼ button to select “OK” or “Cancel” then press the ENtER button.
Press the ExIt button to exit.
Each mode can be reset.
Move Enter Return
Color Tone : Normal ►
Size : 16:9 ►
Digital NR : Auto ►
DNle : Off ►
HDMI Black Level : Normal ►
Blue Only Mode : Off ►
Picture Options tV
Move Enter Return
Color tone : Normal
Size : 6:
Digital NR : Auto
DNle : Off
hDMI Black Level : Normal
Blue Only Mode : Off
Picture Options tV
Off
On
Move Enter Return
Mode : Standard
Backlight 
Contrast 
Brightness 4
Sharpness 40
Color 0
tint G 0 R 0
Detailed Settings
Picture Options
Reset : OK
Picture tV
OK
Cancel
BN68-01514E-00Eng.indd 24 2008-04-08 ¿ААь 11:30:04