Sharp MD-M3H - Manual (Page 31)

29
■ Recording from a CD onto a
MiniDisc (One-Touch Editing)
A CD can be recorded to a MiniDisc, starting from
the first track, with a one-touch operation.
Caution:
● Recording will begin, starting from the first track
of CD.
● After recording (all of the tracks that can be
recorded), the unit will stop automatically.
● When a recording is made at high speed, the
playback sound will not be heard.
● When a damaged CD is recorded at high speed,
the unit may stop whilst recording, or some noise
or a drop out may be recorded. In this case,
record the CD at normal speed.
Notes:
● When the CD playing time is longer than the avail-
able MD recording time, the recording process
will not start even when the CD
0
MD EDIT but-
ton is pressed.
Number of tracks left
for recording Available record-
ing time
● To record as many tracks as are available, press
the CD
0
MD EDIT button again.
However, if the available recording time on the
MD is less than the length of the first track on the
CD, when the CD
0
MD EDIT button is pressed,
the following display will appear.
Then, when the CD
0
MD EDIT button is pressed
again, recording will start. However, when the MD
runs out of space, “DISC FULL” will be displayed
and the CD and MD will stop.
To check the remaining time available for
recording:
1
Press the MD button.
2
Load a MiniDisc.
3
Press the DISPLAY button to find a time fol-
lowed by hyhone.
● The total the number of tracks previously recorded
and the available time remaining will be dis-
played, 4 seconds later, the unit will return to the
original display.
To cancel the operation:
Before pressing the CD
0
MD EDIT (HIGH or
NORMAL) button, press the ■ button.
To stop recording:
Press the ■ button.
● Playback and recording will stop and the track
numbers will be written to the MiniDisc.
It is not possible to pause in the recording mode.
2
1
1
2
4
3
H
3
H
1
Press the ON/STAND-BY button to turn the
power on.
2
Press the CD button.
3
Load a compact disc and a recordable MiniDisc.
● The total number of tracks and the total playing
time on the CD will be displayed.
● When a new recordable MiniDisc is loaded, it will
take about 15 seconds to enter the recording
stand-by mode.
4
Press the CD
0
MD EDIT (HIGH or NORMAL)
button.
● Press the EDIT button to NORMAL for actual
speed, HIGH for high-speed recording.
TOC
REC
0
TOC
REC
● The compact disc loaded will be recorded in
order, starting from the first track. When a
MiniDisc runs out of recording space or when a
compact disc has been completely recorded, the
CD and the MD will stop automatically.
(Continued)