Continued) – Sharp MD-M3H User Manual
Page 37
35
■
To change disc names and track
names
To add a character:
Example: To change “BET” to “BEST”
1
To change disc names, perform steps 1 - 3 on
page 33.
To change track names, perform steps 1 - 2 on
page 34.
2
Press the
or
button to make the character
at the place you want to add a letter begin flash-
ing.
●
To cancel the operation, press the
■
button.
3
Select the character you want to add, pressing
the
or
button. Then, press the ENTER
button.
●
The selected character will be added, and the
original characters will move to the right by one.
4
After entering all of the characters in the name,
press the NAME/TOC EDIT button.
Note:
●
You cannot modify excess 40 characters if they
were entered using some other equipment.
In this case, erase the name and then enter a
new name.
Example: To change “BESUT” to “BEST”
1
To change disc names, perform steps 1 - 3 on
page 33.
To change track names, perform steps 1 - 2 on
page 34.
2
Press the
or
button to make the character
you want to erase begin flashing.
●
To cancel the operation, press the
■
button.
3
Press the CLEAR button.
●
After this step, if you are not going to enter a
character, go to step 5.
4
Select the character you want to add, pressing
the
or
button. Then, press the ENTER
button.
●
The selected character will be added, and the
original characters will move to the right by one.
5
After entering all of the characters in the name,
press the NAME/TOC EDIT button.
(Continued)
CLEAR
NAME/
TOC EDIT
5 3/
2 4
ENTER
H
/ /
/
(Remote control operation)