Preparation, Inserting batteries in the remote control, Remote control use – Sharp FP-P40CX User Manual

Page 11: Battery information

Advertising
background image

ENGLISH

FRANÇAIS

ESPAÑOL

E-9

Battery Information

• The battery life is about 1 year.

• The batteries for this remote control are for initial use only . Change the batteries

when necessary.

• Incorrect usage of the batteries may cause battery fluid leakage and/or damage.

Take care of the following when handling:

• When replacing the batteries, replace both batteries with new ones of the same

type. (Use 2 AA manganese batteries.)

• When not using the unit or remote control for an extended period, remove the

batteries.

• The batteries are for initial use only and may be depleted within 1 year.

INSERTING BATTERIES IN THE REMOTE CONTROL

Remove the back cover

Press and slide the back cover to re-
move.

Insert batteries

Insert batteries with and as
shown below.

Close the back cover

REMOTE CONTROL USE

Operate with the remote control facing the
main unit receiver.

• The signal range is about 23 feet (7m).

• Make sure there are no objects blocking

the path of the signal.

• A beep sound will be heard from the main

unit when a signal is received.

NOTE

• Avoid dropping or damaging the remote

control, using in a high humidity condition,

in direct sunlight or near a heat source.

PREPARATION

k)

rd

g

uster

Light

1

2

3

Receiver

Transmitter

Advertising