Advanced recording – Samsung VP-D200(i) User Manual

Page 42

Advertising
background image

ENGLISH

42

42

Advanced Recording

DEMONSTRATION

Demonstration automatically shows you the major functions that are included with your camcorder so that you may use
them more easily.

The DEMONSTRATION function may only be used in the CAM mode without a tape inserted in the camcorder.

The demonstration operates repeatedly until the DEMONSTRATION mode switched OFF.

1. Set the camcorder to CAM mode.

2. Press the MENU button.

The menu list will appear.

3. Move the MENU SELECTOR to highlight INITIAL.

4. Select DEMONSTRATION from the submenu and push the MENU SELECTOR.

5. To activate the DEMONSTRATION, set DEMONSTRATION ON.

Press the menu button to quit the menu.

The demonstration will begin.

6. To end the DEMONSTRATION, set the DEMONSTRATION to OFF.

Notes

The DEMONSTRATION function only works without a TAPE installed.

The DEMONSTRATION mode is automatically activated when the camcorder is left idle for more than 10 minutes after
switching to the CAM mode (no tape is inserted in the camcorder).

If you press other buttons (FADE, BLC, PHOTO, EASY) during the DEMONSTRATION mode,
the DEMONSTRATION stops temporarily and resumes 10 minutes later if you do not operate any other functions.

While setting the NIGHT CAPTURE to ON, the DEMONSTRATION function does not work.

CAM MODE

INITIAL

CLOCK SET
WL. REMOTE
BEEP SOUND
SHUT. SOUND
DEMO

CAMERA
A/V
MEMORY
VIEWER

CAM MODE

INITIAL SET

CLOCK SET
WL.REMOTE

DEMONSTRATION

BEEP SOUND
SHUTTER SOUND

00709E VP-D230(i) UK (28~60) 12/1/03 9:08 AM Page 42

Advertising
This manual is related to the following products: