Samsung Digimax i6 - Manual (Page 37)

ŝ36Ş
ƈ On camera movie trimming : You can extract desired frames of movie clip during
the movie clip play back.
ƃ If the running time is under 10 seconds, the movie clip can’t be trimmed.
1. Press the Pause button at the point of the movie clip
that you want to start extracting.
2. Press the T button. (The start point doesn't display on
the status bar, but the start point will be marked.)
3. Press the Play & Pause button and the extracted
range will be displayed on the status bar.
4. Press the Play & Pause button once more at the point
where you wish the extracted file to stop.
5. Press the T button and a confirmation window will
display.
6. Select a desired sub menu by pressing the
Left/ Right button and press the OK button.
[Yes]
: The extracted frames are saved as a new
file name.
[No] : The movie trimming will cancel.
Starting play mode
ƃ When a voice is playing back, you can use the earphones.
ƃ If you want to extract the movie clip at the beginning of the frame, press the
Zoom T button before starting the movie clip.
ƃ If the time line bar passes by the start point by pressing the REW(Left)
button, the first frame of the movie clip will display.
ƃ If you don't specify the ending point of the movie clip, the trimming
confirmation window will display at the point of the last frame.
INFORMATION
ƃ Playing back a recorded voice
1. Select the recorded voice that you want to play back
by using the LEFT/ RIGHT button.
2. Press the play & pause button ( ) to play back a
recorded voice file.
- To pause a recorded voice file, while playing it back,
press the play & pause button again.
- To resume playback of the voice file, press the play & pause button
- To rewind the voice file while it is playing, press the LEFT button. To fast
forward the voice file, press the RIGHT button.
- To stop playback of the voice file, press the play & pause button, and then
press the LEFT or RIGHT button.
- When a voice is playing back, you can use the earphones.
Trim:T Capture:E
Trim:T
Trimming?
Confirm : OK
Yes No