Samsung Digimax i6 - Manual (Page 45)

ŝ44Ş
ƈ Images can be displayed continuously at pre-set intervals. You can view the
slide show by connecting the camera to an external monitor.
1. Select the [Start] sub menu by pressing the
UP/DOWN button and press the RIGHT button.
2. Use the Up/Down buttons to select the desired sub
menu.
[Play] selected :
The slide show is closed after one cycle.
[Repeat Play] selected :
The slide show is repeated until cancelled.
3. Press the OK button to start the slide show.
- Press the Pause button to pause the slide show.
- Press the Pause button ( ) again to resume the slide show.
- To stop the slide show, press the play & pause button, and then press the
LEFT or RIGHT button.
ƃ Repeat setting : Setting the slide show to repeat after the first cycle.
1. Use the Up/ Down buttons to select the [Repeat]
menu and press the Right button.
2. Use the Up/ Down buttons to select the desired
sub menu.
3. Press the OK button to save the configuration.
ƃ The loading time depends on the image size and quality.
ƃ While the slide show is playing, only the first frame of a MOVIE file is
displayed.
ƃ While the slide show is playing, the voice recording file will not display.
INFORMATION
SLIDE
Show
Interval
Effect
Back: Set:OK
Play
Repeat Play
SLIDE
Show
Interval
Effect
Back: Set:OK
1 sec
3 sec
5 sec
10 sec
Starting the slide show
ƃ Configure slide show effects : Unique screen effects can be used for the slide
show.
1. Select the [Effect] sub menu by pressing the
UP/ DOWN button and press the RIGHT button.
2. Use the Up/ Down Button to select the type of
effect.
: Normal display.
: Image is displayed slowly.
: Image is displayed slowly from the centre outwards.
: Image moves from the top left.
: The image slides diagonally from top left to bottom right.
: The image slides irregularly.
3. Press the OK button to confirm the setting.
SLIDE
Show
Interval
Effect
Back: Set:OK
OFF