Samsung Digimax i6 User Manual

Page 88

Advertising
background image

ŝ87Ş

FAQ

MEMO

ƈ If a PC (Windows 98) is turned on for a long time and the camera is connected

repeatedly, the PC may not recognise the camera.

ƍ In this case, restart the PC.

ƈ If a PC connected with the camera stops responding while Windows is starting.

ƍ In this case, disconnect the PC and the camera and Windows will start. If the

problem happens continuously, set the Legacy USB Support to disable and
re-start the PC. The Legacy USB Support is in the BIOS setup menu.
(The BIOS setup menu differs from the PC manufacturers and some BIOS
menus don’t have Legacy USB Support) If you can’t change the menu by
yourself, contact to the PC manufacturer or BIOS manufacturer.

ƈ If the movie clip canŖt be deleted, removable disk canŖt be extracted or an error

message displays during the file transfer.

ƍ If you install only the Digimax Master, the problems mentioned above

occasionally happen.

- Close the Digimax Master program by clicking the Digimax Master icon on

the Taskbar.

- Install all the application programs included in the software CD.

(You must install the Movie clip codec)

Advertising