Inserting the batteries, Using the remote control unit – Sharp Aquos LC 32G4U User Manual

Page 16

Advertising
background image

16

1

Open the battery cover.

2

Insert two “AAA” size batteries
(supplied with the product).

• Place the batteries with their terminals

corresponding to the (e) and (f)
indications in the battery compartment.

3

Close the battery cover.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Place the batteries with their terminals corresponding to the (e) and (f) indications.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause

chemical leakage in old batteries.

• Remove batteries as soon as they are worn out. Chemicals that leak from batteries can cause a rash. If you

find any chemical leakage, wipe thoroughly with a cloth.

• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove batteries from it.

Inserting the batteries

If the remote control fails to operate Liquid Crystal Television functions, replace the batteries in the remote
control unit.

Using the remote control unit

Use the remote control unit by pointing it towards the remote control sensor on
the Display. Objects between the remote control unit and the remote control
sensor may prevent proper operation.

Cautions regarding remote control unit

• Do not expose the remote control unit to shock.

In addition, do not expose the remote control unit to liquids, and do not place
in an area with high humidity.

• Do not install or place the remote control unit under direct sunlight.

The heat may cause deformation of the remote control unit.

• The remote control unit may not work properly if the remote control sensor on

the Display is under direct sunlight or strong lighting. In such cases, change
the angle of the lighting or the Display, or operate the remote control unit
closer to the remote control sensor.

Preparation

Advertising
This manual is related to the following products: