Sharp Aquos LC 32G4U - Manual (Page 64)

64
Rear view
Useful adjustment settings
Connecting external speakers
When using external speakers
• Change the speaker setting to external speakers. (See
page XX.)
Make sure to connect the speaker terminal and
cable polarity (
L, +) properly
• The speaker terminals have plus ( L) and minus (+)
polarity.
• Plus is red and minus is black.
• The cables are also divided into plus and minus.
• When connecting the left/right speakers, be sure to
connect the plus/minus terminals with the correct cables.
NOTE
• Unplug the AC cord from the AC outlet before installing
the speakers.
CAUTION
• Make sure external speakers have 4 ohm and 10 watt
specifications.
• Connect the plus/minus terminals with the correct cables.
Incorrect connection may cause a short.
How to connect the
speaker cable
Push down
the tab.
Insert the
end of the
cable.
1 1 1 1 1
2 2 2 2 2
3 3 3 3 3 Lift the tab
back up.