Samsung ML-3560 Series - Manual (Page 29)

Using the Control Panel
3.8
PostScript Menu
This menu provides you with the Print PS Error menu item.
(*: the default setting)
Pitch
When you select one between PCL1 and PCL7
from the Typeface menu, you can determine the
font size by setting the number of characters that
will print in one horizontal inch of type. The
default value, 10 is the best size.
Point Size
When you select one between PCL8 and PCL45
from the Typeface menu, you can determine the
font size by setting the height of the characters in
the font.
Courier
This item lets you select the version of Courier
font to use.
Item Explanation
Print PS
Error
You can select whether or not your printer
prints an error list when a PS error occurs.
• Select On to print PS 3 emulation errors. If an
error occurs, the job stops processing, the error
message prints, and the printer flushes the job.
• If this menu is set to Off, the job is flushed
without an indication of the error.
Item Explanation
Values: 0.44 ~ 99.99 (0.01 unit) *10
Values: 4.00 ~ 999.75 (0.25 unit) *12
Values: Regular*, Dark
Values: Off*, On
EPSON/IBM Menu
This menu sets the EPSON emulation configuration.
(*: the default setting)
Item Explanation
Font
You can select the standard font will be used in
EPSON emulation.
Auto Wrap
This item determines whether or not the printer
automatically performs line feed when the data
overflows the printable area of the print material.
Character
Set
This item allows you to select a character set of
the desired language.
Character
Tab.
This item selects the character set.
LPI
You can set the number of lines printed in one
vertical inch.
Pitch
You can determine the font size by setting the
number of characters that will print in one
horizontal inch of type.
Values: SANSERIF*, ROMAN
Values: On*, Off
Values: USA*, FRANCE, GERMANY, UK,
DENMARK1, SWEDEN, ITALY, SPAIN1, JAPAN,
NORWAY, DENMARK2, SPAIN2, LATIN
Values: ITALIC, PC437US*, PC850
Values: 6*, 8
Values: 10*, 12, 17.14, 20