Samsung ML-3560 Series - Manual (Page 30)

Using the Control Panel
3.9
Network Menu
This menu lets you configure the network interface card
installed in your printer. You can upgrade the firmware of the
network interface card and print a configuration page.
N OTE : This menu only appears when a network card is
installed (ML-3561N, ML-3561ND, or ML-3560 with an optional
network card).
(*: the default setting)
Item Explanation
Config
Network Set whether or not you configure network
values.
If you select Yes, the following options are
available: Config TCP, Config 802.11b,
AppleTalk, and Netware.
Config TCP
Select whether you set the IP address item
or not.
If you select Yes, you can configure the IP
address.
If you select Yes, the IP Get Method option
appears on the display. You can select how to
get the IP address.
IP Get
Method
You can set this item only when you set
Config TCP to Yes.
• BOOTP: The BOOTP server allots the IP
address to you automatically.
• DHCP: The DHCP server allots the IP
address to you automatically.
• Static: You can enter IP address,
subnetmask, and gateway manually.
IP Address
You can select this item only when you set IP
Get Method to Static. This item lets you
enter the IP address manually. Press the scroll
button to set the value of the 1st byte between
0 and 255, and then press the Enter button.
Set the value for the 2nd, 3rd, and 4th byte
the same way.
Values: Yes, No*
Values: Yes, No*
Values: Static, BOOTP, DHCP*
Subnet Mask
You can set this item only when you set IP
Get Method to Static. This item lets you
enter the subnet mask manually. Press the
scroll button to set the value of the 1st byte
between 0 and 255, and then press the Enter
button.
Set the value for the 2nd, 3rd, and 4th bytes in
the same way.
Gateway
You can set this item only when you set IP
Get Method to Static. This item lets you
enter the gateway manually. Press the scroll
button to set the value of the 1st byte between
0 and 255, and then press the Enter button.
Set the value for the 2nd, 3rd, and 4th bytes in
the same way.
Config WLAN
Configure the Wireless Network
environments.
If you select Yes, the following options are
available: SSID, Operation Mode,
Channel, Authentication, Encryption,
Using Key, Key Type, and Key1~Key4.
See “Configuring the Wireless Network” on
page 8.4
N OTE : This menu only appears when an
optional wireless network interface card has
been installed in ML-3560, ML-3561N or ML-
3561ND.
AppleTalk
This item lets you select whether or not you
use the AppleTalk protocol. Select On to use
the protocol.
Netware
This item selects whether you use the Netware
protocol.
If you select On, you can access the Config
Netware menu item.
In the Config Netware menu, you can
specify the frame type parameter used on your
network.
Item Explanation
Values: Yes, No*
Values: On*, Off
Values: On*, Off