Samsung ML-3560 Series - Manual (Page 33)

Using Print Materials
4.2
• Preprinted forms must be printed with nonflammable,
heat-resistant ink that does not melt, vaporize, or release
hazardous emissions when subjected to the printer’s
approximately 383°F (195°C) fusing temperature for 0.1
seconds.
• Store paper in its ream wrapper until you are ready to
use it. Place cartons on pallets or shelves, not on the
floor.
• Do not place heavy objects on top of the paper, whether
it is packaged or unpackaged.
• Keep paper away from moisture, direct sunlight, or other
conditions that can cause it to wrinkle or curl.
N OTE : Do not use carbonless paper or tracing paper. They are
unstable at the fusing temperature and can give of fumes, or
cause damage to the printer.
Loading Paper
Proper paper loading helps prevent paper jams and ensure
trouble-free printing. Do not remove the paper tray while a job
is printing. Doing so may cause a paper jam. See “Sizes and
Capacities” on page 4.1 for acceptable paper size and
capacities for each tray.
The paper level indicator on the front of the paper tray shows
the amount of paper currently left in the tray. When the tray is
empty, the indicator of the bar is completely lowered.
Paper full Paper empty
Using the Tray 1 or the Optional Tray
Use the print material you use for the majority of your print
jobs in the Tray 1. The Tray 1 can hold a maximum of 500
sheets of 20lb paper.
You can purchase an optional Tray 2 and attach it below the
Tray 1 to load an additional 500 sheets of paper. See page 9.7
for more information about installing the optional Tray 2.
To load paper, pull open the paper tray and load paper with the
print side down. For details about loading paper in the Tray 1 or
optional Tray 2, see “Loading Paper” on page 2.4.
Using the Multi-Purpose Tray
The Multi-Purpose Tray is located in the front of your printer. It
can be closed when not in use, making the printer more
compact.
The Multi-Purpose Tray can hold several sizes and types of
material, such as transparencies, cards, and envelopes. You
may also want to use the Multi-Purpose Tray for single page
print jobs on letterheads, colored paper for use as separator
sheets, or other special materials that you do not normally keep
in the tray. You can load approximately 100 sheets of plain
paper, 10 envelopes, 50 transparencies, 10 card stocks, or 25
labels at a time.
• Load only one size of print material at a time in the
Multi-Purpose Tray.
Tray 1
Optional Tray 2
Multi-Purpose Tray