Samsung ML-3560 Series - Manual (Page 70)

Installing Printer Options
9.5
5
Fasten the four screws supplied with your new hard disk.
6
Replace the control board cover.
7
Reinstall the duplex-slot cover or the optional duplex unit.
8
Reconnect the power cord and printer cable, and turn the
printer on.
9
Print a configuration page from the control panel to check
if the hard disk is correctly installed. See page 6.1.
10 Now you need to set the hard disk in your printer driver.
The procedure for setting the hard disk may differ
depending on the selected printer driver.
Take the following steps:
11
Click the Windows Start menu.
For Windows 9x/Me/NT4.0/2000, select Settings and
then Printers.
12
For Windows XP/2003, select Printers and Faxes.
13
Select the Samsung ML-3560 Series PCL 6 printer icon
or Samsung ML-3560 Series PS printer icon.
14
Right-click on the printer icon and select Properties.
15
In PCL 6 Properties, click the Printer tab and then check
Optional Hard Disk Drive(HDD).
In PS Properties, click the Device Option tab and set the
Printer Hard Disk option to Installed.
16
Click OK.
Printing with the Optional Hard Disk
If you have the optional hard disk installed, you can use
advanced printing features, such as storing or spooling a print
job to the hard disk, proofing a job, and specifying of printing
a private job in the printer properties window on your printer
driver.
Once you stored files in the hard disk, you can easily reprint or
delete the stored files using the control panel of your printer.
You can also manage all of the print jobs in the print queue of
the printer hard disk.
Setting the time and date
1
Press the Menu button ( ) on the control panel until
“Setup” appears on the bottom line of the display.
2
Press the Enter button ( ) to access the menu.
3
When “Date & Timet” appears, press the Enter button
(
).
4
Press the scroll button ( or ) until the digit you want
appears and press the Enter button ( ).
You can enter from 2000 to 2065 in the year input section.
The cursor moves to the next position. Repeat step 4 until
all digits appears correctly.
5
Press the Enter button ( ).
Storing a Job
You can store jobs in the installed hard disk.
1
Open the file you want to store.
2
Select Printer from the File menu. The Print window is
displayed (It may look slightly different depending on your
application.)
3
Click Properties. If you see Setup, Printer or Options,
click the button instead.
4
Click the Extra tab and click Print and Hold.
5
Select the Print Mode you want from the drop-down list.
•Normal: prints in normal mode.
•Proof: prints the first file and after a pause prints the
next file.
•Confidential: stores the files secured with a password.
•Store: stores the file to the hard disk.
•Spool: spools the file into the hard disk and prints it from
the hard disk queue.
•Delay: prints the file at a specified time.
6
Click OK until the Print window is displayed.
7
Click OK or Print to start printing.