Samsung HT-XQ100G - Manual (Page 10)

Audio Cable
(not supplied)
If the external analog
component has only one
Audio Out, connect either left
17
ENG
18
CONNECTIONS
Optical Cable
(not supplied)
Connecting External Components
Press AUX on the remote control to select ‘D.IN / AUX’ input.
• Each time the button is pressed, the selection changes as follows: D.IN ➝ AUX
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD ➝ D.IN ➝ AUX ➝ FM.
3
Connect the Digital In (OPTICAL) on the main unit to the Digital Output on the external
digital component. 1
Connect AUX (Audio) In on the Home Theater to Audio Out on the external analog
component.
• Be sure to match connector colors.
2
Example: Digital signal components such as a Set-top Box or CD Recorder.
Connecting an External Digital Component
• You can connect the Video Output jack on your VCR to the TV, and connect the Audio
Output jacks on the VCR to this product. Note
Press STOP button.
• If playing a disc, press the STOP button twice so that “ STOP”, appears on the display.
Press and hold P.SCAN button on the remote control for over 5 seconds.
• Pressing and holding the button for over 5 seconds will select " Progressive Scan" and "Interlace Scan"
alternately.
• When you select P.SCAN, " P.SCAN" will appear on the display.
• To set P.Scan mode for DivX discs, press the P.SCAN button on the remote control for more than
5 seconds with no disc in the unit (“' NO DISC" on the display), then load the DivX disc and play.
In interlaced-scan video, a frame consists of two
interlaced fields (odd and even), where each field
contains every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/30th of a second, contains
two interfaced fields, thus a total of 60 fields are
displayed every 1/60th of a second.
The interlaced scanning method is intended for capturing
a still object.
Interlaced Scan (1 FRAME = 2 FIELDS)
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
An entire image is drawn at one time, as opposed to the
interlaced scanning process by which a video image is
drawn in a series of passes.
The progressive scanning method is desirable for dealing
with moving objects.
Progressive Scan (FULL FRAME)
What is Progressive (or Non-Interlaced) Scanning?
• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive
scan TVs.)
• Depending on the capabilities of your TV, this function may not work.
Note
1
2
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entire
picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information
(all lines displayed in one pass) to create a clear and detailed picture without visible scan lines.
P.SCAN
(Progressive Scan)
Function
1p~38p(XQ100G)-ENG 2003.4.6 9:16 AM Page 20