Samsung HT-XQ100G - Manual (Page 9)

ENG
16 15
CONNECTIONS
Choose one of the two methods for connecting to a TV.
Connecting the Video Out to TV
- Connect the supplied video cable from the VIDEO OUT jack on the side panel of the system
to the VIDEO IN jack on your TV.
Composite Video ....... (Good Quality) METHOD 1
- If your television is equipped with Component Video inputs, connect a component video cable
(not supplied) from the Pr, Pb and Y jacks on the side panel of the system to the corresponding
jacks on your TV.
Component ....... (Best Quality) METHOD 2
• When the Progressive scan mode is selected, the VIDEO output (Yellow) does not output
any signal. Note
TV
METHOD2
(supplied)
METHOD 1
Installing the DVD player
1
Separate the rear cover(A).
2
3
4
5
6
Close the rear cover(A).
Fasten the 1 screw on the cover(B).
Put the cables connected to the Video OUT,
Component OUT and Audio IN ports into
the right groove.
Put the speaker cable connected to the
Speaker OUT port into the left groove.
Remove the 1 screw of the cover(B).
cover(A)
cover(B)
1p~38p(XQ100G)-ENG 2003.4.6 9:16 AM Page 18