Recording from connected equipment without a timer – Sony RDR-HX710/HX910 User Manual

Page 52

Advertising
background image

52

You can record from a connected VCR or similar
device. To connect a VCR or similar device, see
“Connecting a VCR or Similar Device” on
page 23
. Use the DV IN jack on the front panel if
the equipment has a DV output jack (i.LINK jack)
(RDR-HX710/HX910 only).

1

Press HDD or DVD.

If you select DVD, insert a recordable DVD
(see “Inserting a Disc” on page 29).

2

Press INPUT SELECT to select an input
source according to the connection you
made.

The front panel display changes as follows:

3

Select the line input audio when recording
a bilingual programme on the HDD or DVD-
RWs (VR mode).

Press TOOLS to select “Line Audio Input,”
and press ENTER. Then select “Bilingual,”
and press ENTER.
For details about bilingual recording, see
page 42
.

4

Press REC MODE repeatedly to select the
recording mode.

For details about the recording mode, see
page 41
.

5

Press

X

REC PAUSE to set this recorder to

record pause.

6

Insert the source tape into the connected
equipment and set to playback pause.

7

At the same time, press

X

REC PAUSE on

this recorder and the pause or play button
on the connected equipment.

Recording starts.
To stop recording, press x REC STOP on this
recorder.

* RDR-HX710/HX910 only

If you connect a digital video camera with a DV
IN jack (RDR-HX710/HX910 only)

See “DV Dubbing (RDR-HX710/HX910 only)”
on page 77
for an explanation of how to record
from the DV IN jack.

z

Hint

You can adjust the settings for the recording picture
before recording. See “Adjusting the recording picture
quality and size” on page 47.

b

Notes

• When recording a video game image, the screen may

not be clear.

• Any programme that contains a Copy-Never copy

guard signal cannot be recorded. The recorder
continues to record, but a blank screen will be recorded.

Recording from connected
equipment without a timer

L2

L1

L4

L3

DV*

programme
position

Advertising