Dv dubbing (rdr-hx710/hx910 only), Before dv dubbing, Preparing for dv dubbing – Sony RDR-HX710/HX910 User Manual

Page 77

Advertising
background image

77

D

V

Du
bbi
ng (R

D

R

-H

X7
10/
H

X

910

on
ly

)

DV Dubbing
(RDR-HX710/HX910 only)

Before DV Dubbing

This section explains dubbing with a digital video
camera via the DV IN jack on the front panel. If
you want to dub by way of the LINE IN jacks, see
“Recording from connected equipment without a
timer” on page 52.

To record from the DV IN jack

The DV IN jack on this recorder conforms to the
i.LINK standard. You can connect any other
equipment that has an i.LINK (DV) jack, and
record digital signals.
Follow the instructions in “Preparing for DV
dubbing,
” and then move on to the section on
dubbing. For more information about i.LINK, see
“About i.LINK (RDR-HX710/HX910 only)” on
page 105.

z

Hint

If you plan to do additional editing on a disc after the
initial dub, use the DV IN jack and record on a DVD-RW
(VR mode) or HDD.

You can connect a digital video camera to the DV
IN jack on the recorder to record or edit from a
DV/Digital 8 format tape. Operation is
straightforward because the recorder will fast
forward and rewind the tape for you – you do not
need to operate your digital video camera. Do the
following to start using the “DV Edit” functions of
this recorder.
See the instruction manual supplied with the
digital video camera as well before connecting.

b

Notes

• The DV IN jack is for input only. It will not output

signals.

• You cannot use the DV IN jack when:

– your digital video camera does not work with this

recorder. Connect the camera to the LINE IN jack
and follow the instructions of “Recording from
connected equipment without a timer” on page 52
.

– the input signal is not in DVC-SD format. Do not

connect a MICRO MV format digital video camera
even if it has an i.LINK jack.

– the images on the tape contain copy protection

signals, which limit recording.

• If you want to play the disc on other DVD equipment,

finalize the disc (page 39).

Hookups

1

Press HDD or DVD to select the recording
destination.

If you select DVD, insert a disc (see “Inserting
a Disc” on page 29)
.

2

Insert the source DV/Digital 8 format tape
into your digital video camera.

For the recorder to record or edit, your digital
video camera must be set to video playback
mode.

Preparing for DV dubbing

DVD recorder

to DV IN

i.LINK cable (not supplied)

DV output

Digital video camera

: Signal flow

,continued

Advertising