Sharp XE-A303 - Manual (Page 19)

17
Part
1 QUICK START GUIDE Part
2
Part
3
1. Specify the department code.
2. Text programming (Press s to skip. / Press A to terminate.)
PRICE
06 0.00 s
(3) Press the s key to register the item name.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
BOOK _
06 032 BOOK S S S (2) Enter an item name.
A maximum of 16 characters can be entered.
Please refer to "Guidance for text programming" on
page 13 for entering the item name.
When you start entering a character, the current
text data will be overwritten by new data.
Use the
S and B keys to delete unnecessary
text data.
Pressing the
P and @ key moves the cursor to
the right and left respectively.
ENTER TEXT
06 0.00
DEPT.06
06 068
:
(1) Press : key to enter text programming.
On the upper line of the display, immediately after
displaying guidance message, the current text data
will be displayed.
On the lower line of the display, the character code
corresponding to the first character of the text data
will be displayed.
DEPT.06
06 0.00
ENTER[00]KEY
06 0.00
§ (1) For dept.1 through 20, press the department key.
For dept.21 through 40, press the D key, and then
press the department key.
Or enter dept. code using numeric key, and then
press the
d key.
On the upper line of the display, immediately after
displaying the current text data, guidance message
for the next step will be displayed.
On the lower line of the display, the corresponding
dept. key code you entered will be displayed.
Operator display Key operation
A303_1(En) 06.7.22 9:20 AM Page 17