Sharp XE-A303 - Manual (Page 25)

23
Part
1 QUICK START GUIDE Part
2
Part
3
3. Unit price programming (Press s to skip . / Press A to terminate.)
4. Associated dept. programming (Press s to skip . / Press A to terminate.)
5. Sign programming (Press s to skip . / Press A to terminate.)
ENTER PLU TYPE
0071 PLU s
(2) Press the s key to register setting.
On the upper line of the display, guidance message
for the next setting will be displayed.
On the lower line of the display, the current setting
will be displayed.
(1) Go to (2) when the sign does not need to be
changed from "(+)". Otherwise, press : key to
display "(-)".
Each time
: key is pressed, the display shows "(-
)" and "(+)" alternately.
Choose "(+)" for positive entry and "(-)" for negative
entry.
Default setting is "(+)" for all 1800 PLU codes.
SIGN
0071 (+) s
(2) Press the s key to register the associated
dept. code.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
ENTER DEPT#
0071 1 1
(1) Enter an associated dept. code using numeric key.
Default setting is dept. 1.
For deleting PLU, enter 0 instead of an associated
dept. code.
ENTER DEPT#
0071 01 s
(2) Press the s key to register the unit price.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting will
be displayed.
PRICE
0071 500 500
(1) Enter a unit price using numeric keys.
A maximum of 6 digits can be set.
For a subdepartment, set the limit amount of unit
price entry.
Default setting is 0.
PRICE
0071 0.00 s
(3) Press the s key to register the item name.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
A303_1(En) 06.7.22 9:20 AM Page 23