S s s – Sharp XE-A303 User Manual
Page 60
58
Programming for
V
1. Specify the key to program.
2. Text programming (Press
s
to skip. / Press
A
to terminate.)
3. Rate programming (Press
s
to skip. / Press
A
to terminate.)
OPEN RATE ENTRY
37 OPEN ENABLE
s
(2) Press the
s
key to register the rate.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
ENTER EX RATE
37 0.939938
0.939938
(1) Enter the rate using numeric keys, using a decimal
point when setting fractional rates.
The rate can be set from 0.000000 to 999.999999.
Default setting is 0.000000.
ENTER EX RATE
37 0.000000
s
(3) Press the
s
key to register the text.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
EX _
37 032
EX
S S S
(2) Enter the text.
A maximum of 12 characters can be entered.
Please refer to "Guidance for text programming" on
page 13 for entering the text.
When you start entering a character, the current
text data will be overwritten by new data.
Use the
S
and
B
keys to delete unnecessary
text data.
Pressing the
P
and
@
key moves the cursor to
the right and left respectively.
ENTER TEXT
37 0.00
EXCH1
37 069
:
(1) Press
:
key to enter text programming.
On the upper line of the display, immediately after
displaying guidance message, the current text data
will be displayed.
On the lower line of the display, the character code
corresponding to the first character of the text data
will be displayed.
EXCHANGE PROG.
37 0.00
ENTER[00]KEY
37 0.00
V
(1) Press the
V
key to enter
V
programming.
On the upper line of the display, immediately after
displaying "EXCHANGE PROG.", guidance message
for the next step will be displayed.
On the lower line of the display, the corresponding
function no. will be displayed.
Operator display
Key operation
A303_3(En) 06.7.22 4:41 PM Page 58