Sharp XE-A303 - Manual (Page 77)

75
Part
3 FOR THE MANAGER Part
2
Part
1
The cash register provides various options so you can use the register to suit your sales needs.
In this section, you can program the following features (parameters within parentheses indicates default setting):
• Power save mode (entering the power save mode after 30 minutes)
• Logo message print format (Header 6-line message)
• Clerk code assignment (Clerk codes 1 to 4 are assigned for clerk numbers 1 to 4 respectively.)
• Entry digit limit for cash in drawer (999999999)
• Entry digit limit for cheque cashing (99999999)
• Entry digit limit for cheque change (99999999)
• Thermal printer density (standard density)
• Training clerk specification (none) - If you specify a clerk number who is trained for use on this cash register,
the cash register will go into training mode when the clerk is signed on for sales entries. The sales operations
done by the trained clerk do not affect sales totals. For details, refer to TRAINING MODE section.
Power save mode
* Item: Selection: Entry:
A Entering power save mode Yes* 0
when time is displayed No 1
B-D Time(min.) to entering power save mode 001-254 or 999
since no operation is made (Default 030)
When 999 is set for B to D, entering into power save mode is inhibited.
s 10 @
0060 s A
Print Key operation example
s 10 @
*ABCD
A s
Various Function Selection Programming 2 3
A303_3(En) 06.7.22 4:41 PM Page 75